Rolling Steel Doors
Choosing a vendor for your rolling steel door needs is a big decision. You want a company that has experience, innovation and dedication to customer care – that’s where Janus International comes in.
Janus has every product series, model size and option in the book. With a full-line of rolling steel doors to fit virtually any application, from warehouses and loading docks to freight terminals and distribution centers, each model encompasses structural integrity and is built to last.
In addition to our wide selection of models and product offerings, our rolling steel doors are known for minimal maintenance and easy installation. We also offer the benefit of either installing the doors ourselves, or coordinating with a local dealer to get your project off the ground as quickly as possible. The available options include: Commercial Slat Doors, Heavy Duty Service Doors, Fire Doors, Fire Rated Counter Shutters, Insulated Service Doors, Counter Shutters and Grilles.
ROLLING STEEL DOOR PRODUCT INFORMATION
Features Include
Door Springs
- Coated with grease during production, which prevents rust and corrosion
- Enclosed in a tube for lifetime protection
- Provide for smooth door operation
Ratchet Tensioning Device
- Allows for simplified spring tensioning
- Tensions all springs at once
- Requires no pins to hold the tension on the spring
Radial Ball Bearings
- Provided at no additional cost
- Permanently lubricated
- Require virtually no maintenance
Dead Axle and Torque Tube Assembly
- Tube housing protects springs and strengthens the axle
- Eliminates axle push and shift that a live axle would create
- Allows for springs to be tuned all at the same time
Documents
Standard Features Include
- Enclosed Hood
- Reduction gear chain hoist
- 3-piece structural steel guides
- Double angle bottom bar with weather seal
Documents Include
Product Brochure
Shop Drawings
- Model 400 FIM Shop Drawing
- Model 418 with Chain Hoist Shop Drawing
- Model 418 with GH Motor Shop Drawing
- Model 418 with H Motor Shop Drawing
- Model 418 FIM Shop Drawing
- Model 420 with Chain Hoist Shop Drawing
- Model 420with GH Motor Shop Drawing
- Model 420 with H Motor Shop Drawing
- Model 422 with Chain Hoist Shop Drawing
- Model 422 with GH Motor Shop Drawing
- Model 422 with H Motor Shop Drawing
- Model 424 with Chain Hoist Shop Drawing
- Model 424 with GH Motor Shop Drawing
- Model 424 with H Motor Shop Drawing
Technical Specifications
- Model 418 Technical Specifications
- 021-400 Series Technical Specifications
- 021-400 Series Windload Certified Technical Specifications
Installation Instructions
- Series 400 Installation Instructions
- Model 418 FIM Installation Instructions
- Model 422 FIM Installation Instructions
Clearance Requirements
Standard Features Include
- U.L. Label sizes up to 120 sq. ft., oversized labels are provided for openings up to 600 sq. ft. All doors comply with 45 minute, 1-1/2 hour, 3 hour, and 4 hour (18-gauge only)
- Slats: 22, 20, and 18-gauge galvanized steel flat slats, galvanized according to ASTM A-653 and finished with a high-tech polymer based super durable polyester topcoat.
- Guide assembly, barrel assembly, and hood
- Floor level release and reset handle provided with the chain hoist, key test station provided with motor operation. No tools or ladders are required for drop test or reset our simple test fire door.
Documents Include
Product BrochureTechnical Specifications
Installation Instructions
Clearance Requirements
Drop Test Form
Standard Features Include
- 22-gauge flat slats with 1-1/2” high profile
- Steel endlocks
- Enclosed hood
- U.L. approved
- Fusible Links
- Slide Bolt Locks
- Bottom weather seal
- 2 year limited warranty
Documents Include
Product BrochureInstallation Instructions
Clearance Requirements
Drop Test Form
Standard Features Include
- Enclosed hood with baffle
- Reduction gear chain hoist
- 3-piece structural steel guides with weather seal
- Double angle bottom bar with weather seal
Documents Include
Product BrochureShop Drawings
- Model 618 with Chain Hoist Shop Drawings
- Model 618 with GH Motor Shop Drawings
- Model 618 with H Motor Shop Drawings
- Model 620 with Chain Hoist Shop Drawings
- Model 620 with GH Motor Shop Drawings
- Model 620 with H Motor Shop Drawings
- Model 620IM Shop Drawings
- Model 622 with Chain Hoist Shop Drawings
- Model 622 with GH Motor Shop Drawings
- Model 622 with H Motor Shop Drawings
- 023-624 Insulated Steel Backed Technical Specifications
- 023-624 Windload Certified Insulated Steel Backed Technical Specifications
- 023a-600 Insulated Steel Backed Technical Specifications
- 023a-600 Windload Certified Insulated Steel Backed Technical Specifications
Clearance Requirements
Standard Features Include
- Flat slats with 1-1/2” high profile
- Steel end-locks
- Enclosed Hood
- Slide bolt locks
- Aluminum angle bar with weather seal
- 2-Year limited warranty
- Manual Push up to 10’-4” wide
- Crank operation above 10’-4” wide
Documents Include
Product BrochureTechnical Specifications
Standard Features Include
- Attached charging arm makes winding the spring easy and safe
- Exclusive extruded aluminum telescoping support tubes make loading, unloading and installing a lighter and easier task (Optional)
- 15” front loading bracket plates allow for quick drip-in barrel installation and level adjustment
- Curtains are pre-wrapped on an extruded aluminum barrel simplifying the job on site
- Smart-lock system allows end-users to engage the lock at a convenient height and then close the grille to the floor where the grille locks automatically
Documents Include
Product BrochureShop Drawings
Technical Specifications
Installation Instructions